NH3 Laser Gas Analysis System
- Product Item : eLAS-100S
- Category： Laser Gas Analysis System
- Laser Technology
- NH3 Laser Gas Analysis System
- Gas Analyzer
Introduction
eLAS-100S laser gas analysis system uses the whole process of high temperature combined heat extraction to monitor HCL/HF/NH3 gas in sample gas.
The system consists of a sampling unit, a transmission unit, a preprocessing unit, a control unit, and an analysis unit. The analysis unit uses TDLAS technology.
Applications
• SCR, incineration & combustion processes
• Emission monitoring：Power generation, engine development,
waste incineration furnaces, …
• Environmental monitoring: Landfill & green-house gases, livestock, ...
• Chemical engineering: Production control & monitoring …
• Safety: Leak detection, refrigeration, toxic gases, .
• Climate control & monitoring: Livestock, climate chambers & rooms, ..
Specifications
|
Measured gas |
NH3 |
|
Method |
Tunable Diode Laser Spectrometry (TDLS) |
|
Range |
NH3: 0-50ppm，0-100ppm,0-500ppm（ Customized） |
|
Accuracy |
± 1% full scale reading depending on integration stability (temperature & pressure) |
|
Precision |
1ppm |
|
Displayed resolution |
0.1ppm |
|
Response time |
Less than 15S (at gas flow rate of 3 L/min) |
|
Sampling Gas Temperature |
Below 800℃ |
|
Analog Output |
4`20mA DC, Insulating output, maximum load is 900 ohm, |
|
Digital Output |
RS232/485 |
|
Power Supply |
90-240VAC / 50/60Hz 120W |
|
Warm up time |
30 minutes |
|
Interface |
RS485 |
|
Ambient Temperature |
Temp：-10-50℃ Humidity：0-90%RH |
|
Dimension |
760(H)×500(L)×255(W)mm(analysis cabinet)
Weight ： 60kgs
|
