New design HCL gas analysis system for Hazardous waste treatment plant based on TDLAS technology ,measurement range 0-20mg/m3,light weight whole system only 50kgs
flue gas treatment technology and application conference in iron and steel industry and coking industry
HCL laser on-line monitoring system for medical waste , the equipment is installed in the middle of the chimney, about 10m high, and the diameter of the chimney is 0.5m.measurement range is 0-300mg/m3.
Portable HCL Gas Analyzer Portable laser gas analyzer are available for monitoring NH3/HF/HCL.some The technology based on the TDLAS technology . The portable model is compact and ready to used in the plant without the need for sample treatment as it is a hot extraction system complete with sampling probe ,heated line and overhead filter
Wall Mounted Laser Gas Analysis System(TDLAS) which can replace in-situ type gas analyzer ,more easy installation ,no effected by the dust to measure specific process gas like NH3/HCL/HF/H2S/O2/COetc. Using high temperature with heat extraction technology, continuous online monitoring of the system including sampling and transmission unit, pre-conditioning and control unit, analysis unit mainly u
Portable laser HCL gas analyzer，TDLAS
SCR’S and SNCR’s reduce NOX emission by injecting ammonia into the combustion flue gas ,which ideally reacts with the NOX to form H2O and N2.The efficiency of the SCR/SNCR is determined by monitoring the outlet for excess NH3,referred to as NH3 slip .
The online/portable fuel gas analyzer in coal gasifier and biomass gasifier, which is produced by Wuhan Enviro Solutions Technology Co.,ltd can fully satisfy various gasifiers’ processes controls and safety testing requirements. It detects six gases compositions (CO, CO2, CH4, H2, O2 and CnHm) at the same time, with simple operation and easy maintenance.
Portable syngas analyzer only 2.5kgs ,measure H2/CH4/CO/CO2/O2/CnHm and heating value in the one unit.Using 5'' TFT LCD touch screen,measurement value display /real time curve display,USB output to display history data
The Continuous Emission Monitoring System (CEMS) is monitor the total air pollutant emissions from stationary sources, mainly used for industrial boilers, power plant boilers, industrial furnaces emissions monitoring, SO2, NO,NO2, O2,HCL,HF, H2O etc dynamic continuous monitoring, simultaneous to measure gas flow, oxygen content, gas pressure, gas temperature, gas humidity etc, automatically reco