Flue gas sampling probe

Introduction

•Maximum flue gas temperature: 600°C

•Ambient operating temperature: -20°C to +80°C

•Protection degree: IP65

•Filtration chamber volume: 120 cm³

•Filter chamber heating temperature: 260°C (adjustable from 100°C to 300°C)

•Stainless steel filter, filtration precision: 2µm

•Ammonium salts cleaning device to effectively prevent ammonia crystallization

•Internal back-flushing function and controls with automatic cleaning every 4 hours and with high temperature pneumatic valve/check valve/solenoid valve

•Back-flushing: with pure nitrogen or instrumental dry compressed air, oil-free, dust-free, pressure range: 0.3mPa-0.8MPa •Back-flush port: OD6/4mm (optional OD8/6mm)

•Sampling gas outlet port: OD6/4mm or OD8/6mm SS316 compression fittings

•Calibration gas port: OD6/4mm or OD8/6mm

•Power supply: 220VAC/50Hz/1100W

•Mounting flange: DN65 (optional ANSI 150)

•Mounting accessories: DN65 sleeve to weld with counter flange + bolts + flange flat sealing

•G¾” thread interface for connection of optional gas sampling probe

•With gas sampling probe SS316L - G¾" – OD 21.7mm, L 1500mm •Optional probe heating jacket

•Optional heating of the back-flushing

•Optional heated line for gas transfer to gas analysis systemsampling probe for CMES application